Our Blog

Time to brush! So, you make sure you gently brush the plaque off the outside surfaces of your teeth. You want to present a gleaming smile to the world, after all. And you make sure to brush the inside surfaces as well, because who wants to feel a fuzzy patch of plaque every time their tongue hits their teeth? And, naturally, you remember to clean the tops of your molars, because those crevices make them more cavity-prone than any other surface.

Done? Not quite!

You might be surprised to learn that no matter how well you’ve brushed all the visible surfaces of your teeth, you’ve left quite a bit of enamel untouched—the adjoining, or touching, surfaces of the teeth that sit next to each other.

You’ve probably noticed that your bristles can’t . . . quite . . . reach all the enamel between your teeth (especially between your molars!) when you’re brushing. This means that food particles and plaque have an easier time sticking around. And when the bacteria in plaque are left undisturbed, especially with a banquet of food particles available, they produce acids which gradually eat away at the enamel covering our teeth, creating a cavity.

Here’s where we work in some specific dental vocabulary. “Interproximal” means between the adjoining, or touching, surfaces of the teeth. And an interproximal cavity is a cavity that develops on one of those side surfaces of your teeth.

• Preventing Interproximal Cavities

Fortunately, prevention is about as basic as it can be—brushing and flossing effectively. Dentists recommend brushing for two minutes at least twice a day and flossing once each day. While most of us are good about keeping up with brushing, sometimes that daily flossing is more a goal than a reality.

But it’s flossing which really does the trick when it comes to interproximal cleaning. If you floss correctly, food particles and plaque are removed from between the teeth and around the gum line—places where bristles just can’t reach.

When you wear braces, though, flossing isn’t quite so basic. Getting that floss just where it needs to be in between brackets and wires and in between teeth can be a challenge!

The good news is there are many products designed just to make flossing easier while you’re in orthodontic treatment:

• Floss threaders are flexible hoops that help you thread floss behind your wires easily.
• Precut floss strands use a stiff tip at one end for threading floss through wires.
• Interproximal brushes are tiny, cone-shaped brushes which can fit between your teeth and braces for precise cleaning.
• Water flossers eliminate floss altogether, using a pulsing stream of water to clean between and around teeth and braces.

During your next visit to our Mount Vernon, WA office, Dr. Andrew Nalin can give you tips on how to use any of these tools effectively for cleaner teeth and cleaner braces.

Preventing cavities on the exterior surfaces of your teeth is probably pretty much automatic by now, but don’t forget the potential for stealth decay! If we find signs of erosion on the sides of your teeth, or if your hygienist lets you know that you’ve got a lot of interproximal plaque buildup, work with your dental team to make sure “interproximal cavity” doesn’t become a working part of your dental vocabulary.

Our team at Nalin Orthodontics knows that there are many ways you can protect your pearly whites throughout your orthodontic treatment. If you follow the rules and brush your teeth twice a day, floss often, and protect your appliances from damage, you should have a successful treatment.

But did you know there’s another way to keep your teeth sparkling and healthy during your time wearing braces?

Fluoride, the mineral that helps you prevent cavities and tooth decay, can also help keep your teeth strong. Fluoride comes in two varieties: topical and systemic. Depending on your oral health or the recommendation of Dr. Andrew Nalin, you may be required to have a fluoride treatment every three, six, or 12 months. We may also prescribe a fluoride product such as a mouthwash, gel, or antibacterial rinse for at-home treatment to keep your teeth happy in between visits.

If you have any other questions about fluoride or your treatment, please don’t hesitate to give us a call!

Orthodontists and dentists both help patients improve their oral health, but in different ways. Dentistry is a broad medical specialty that deals with the teeth, gum, nerves, and jaw, while orthodontics is a specialty within dentistry that focuses on correcting bites, occlusion, and the straightness of teeth. One important difference is that all orthodontists like Dr. Andrew Nalin are dentists, but not all dentists are licensed orthodontists.

How are they similar?

The main similarity between a dentist and orthodontist is that they both focus on oral care. An orthodontist can work in a dental office and provide the same care as a dentist. So in this respect, they are quite similar. They are both considered doctors, and deal with the teeth and gums.

How are they different?

There are more differences than similarities. An orthodontist requires additional schooling as a dental specialty; the situation is similar to a doctor who obtains additional schooling to become a surgeon. Another difference is that orthodontists specialize in helping patients with the alignment of their teeth, improving their bite, or fitting them for corrective braces and devices. If a patient has an overbite, a dentist will refer him or her to an orthodontist.

Dentists typically encourage good oral hygiene and provide services related to:

• Tooth decay
• Root canals
• Gum disease
• Crowns
• Bridges
• Veneers
• Teeth whitening

Orthodontists are dentists that specialize in the alignment of teeth, and provide services related to:

• Misaligned teeth
• Crowded teeth
• Overbite
• Underbite

What an orthodontist can help with

Orthodontists help with crooked teeth, but they assist patients with other issues as well. These include overbites and underbites, crossbites, spaces between teeth, overcrowding of teeth, and the treatment of temporomandibular disorders (TMD). Additional problems with the jaw also need to be treated by an orthodontist.

While a dentist may be trained to provide orthodontic care in addition to extractions, TMJ treatments, and fillings, trusting your smile to an orthodontist can better balance the different procedures you require.

To learn more about the difference between dentists and orthodontists, or to schedule an initial consultation with Dr. Andrew Nalin, please give our team at Nalin Orthodontics a call at our convenient Mount Vernon, WA office.

Bite problems are so common that most of us know someone who’s worn braces. So perhaps you’re already familiar with the terms “overbite” and “underbite”—but if you’ve been diagnosed with an “overjet,” that just might be an orthodontic diagnosis that is new to you. If so, here are a few questions and answers to help promote overjet understanding.

Just what is an “overjet”?

An overjet is a type of malocclusion, which means that there’s a problem with your bite, the way your jaws and teeth fit together when you bite down. In a healthy bite, the front top teeth project slightly beyond, and slightly overlap, the bottom teeth. The key word here is “slightly.”

An overjet is a Class II malocclusion, which means that the upper front teeth project further beyond the lower teeth than they should. Overjets and overbites are both Class II malocclusions, and the words are often used interchangeably, but there’s a notable difference between the two conditions.

An overbite occurs when the top teeth overlap the bottom teeth too far vertically, and you can’t see as much of the lower teeth as you should when you bite down.

An overjet is considered more horizontal in nature, where the top teeth project at an outward angle toward the lips instead of pointing straight down toward the bottom teeth. This condition is sometimes called protruding or buck teeth.

What causes an overjet?

The reason for your overjet might be dental (caused by tooth alignment), or skeletal (caused by bone development), or a combination of both.

Overjets can run in families. They can also be caused by the size and position of your jaws and the shape and position of your teeth, all of which affect your bite alignment. But early oral habits, such as prolonged and vigorous thumb-sucking or pacifier use, can also contribute to overjet development.

How do we treat an overjet?

There are many types of treatment available. Dr. Andrew Nalin will recommend a treatment plan based on the cause and severity of your overjet. Because some treatments are effective while bones are still growing, age plays a part as well.

• Braces and Aligners

If you have a mild overjet, and minor dental issues are the main cause of the malocclusion, braces or clear aligners can effective.

• Functional Appliances

If the overjet is caused by a problem with upper and lower jaw development, devices called functional appliances can be used to help guide the growth of the jawbones while a child’s bones are still forming.

For young patients, there are several appliances which can help correct an overjet. Some, such as the Twin Block and the Forsus Spring appliances, work inside the mouth, while others, like headgear, are worn externally. Your orthodontist will recommend the most effective appliance for your needs.

• Surgical treatment

In some cases, where the malocclusion is skeletal in nature as well as dental, surgical treatment might be necessary to reshape the jawbone itself.

If we recommend surgery, oral and maxillofacial surgeons are experts in surgical procedures designed to create a healthy and symmetrical jaw alignment. Dr. Andrew Nalin will work with your surgeon to design a treatment plan, which will usually include braces or other appliances following surgery.

Why treat your overjet?

A serious, moderate, or even mild overjet can lead to many dental and medical problems, including:

• Concerns about facial and dental appearance
• Front teeth which are more at risk for injury
• Difficulty closing the lips
• Problems speaking or chewing
• Headaches, facial, and temporomandibular (jaw) joint pain

When you work with our Mount Vernon, WA team to correct your overjet, you’re not just correcting a problem. You’re also creating something—a healthy, comfortable bite, and an attractive, confident smile. We can talk about general answers to your overjet questions, but when it comes to understanding your very individual smile, Dr. Andrew Nalin will have all the answers you need to make that healthy bite and that confident smile a reality!